Category: NAA
-
Network Audio Daemon 5.1.3 released
Fixes for low delay mode. Improvements for playback reliability on ARM hardware in normal mode.
-
Network Audio Daemon 5.1.1 released
Improved start accuracy on combo output with ALSA backend. Fix some regressions.
-
Network Audio Daemon 5.1.0 released
Support for synchronizing multiple NAA’s for multi-channel / multi-room use. Fixes for DSD inputs through NAA. NAA OS updates. Some minor improvements and fixes.
-
NAA 5.0.2 Linux packages
Linux packages for NAA 5.0.2 has been released. These include minor improvements and support for Ubuntu 24.04 LTS “Noble”.
-
NAA OS 5.0.2 released.
Major update to the OS. Also bringing support for Raspberry Pi 5. And CuBox-i/Rendu support is now also on v5 level.
-
Network Audio Daemon 5.0.0 released!
New fifth generation of the NAA protocol. Support for; multiple connections/devices, buffer level info, low delay mode, hardware volume control, passing playback position, and passing metadata (including picture). Improved behavior under various networking environments and situations.
-
Network Audio Daemon 4.6.0 released!
Support for new Linux USB Audio Class 2 device side driver with automatic rate change support. (relevant platforms only)
-
Network Audio Daemon 4.3.0 released!
Improvements to the input support, especially on slaved source clocks.
-
Network Audio Daemon 4.2.5 released.
Update for Linux platforms. Fix rate switching issues on kernels 5.15 or later. Updated packages for “armel” architecture. Minor fixes and improvements.
-
Network Audio Daemon 4.2.0 released.
Workaround for certain buggy XMOS USB firmware versions. Component updates and minor fixes.
-
Network Audio Daemon 4.1.3 released.
Update for selected set of Linux distributions. Small fix for USB Audio Class 2 input. Updated NAA OS images.
-
Network Audio Daemon 4.1.1 released.
Changed how stream start and stop are handled. USB Audio Class 2 inputs are now enabled also on Ubuntu and Fedora 31 builds.
-
Network Audio Daemon 4.1.0 released!
Support for USB Audio Class 2 inputs on select platforms. Bug fixes and improvements.
-
Network Audio Daemon 4.0.0 released!
New NAA protocol version 4 with support for inputs. Support for virtual devices through a configuration file.
-
Bootable NAA images updated.
Now RaspberryPi images contain wider selection of overlays listed here (link obsolete).
-
Network Audio Daemon 3.6.0 released.
Changed IPv4/IPv6 dual protocol handling, small protocol update, small improvements and bug fixes, component updates. Support for exaSound ASIO driver on macOS.
-
Network Audio Daemon 3.5.5 / 3.5.6 released.
Version 3.5.5.x for Linux and 3.5.6 for macOS and Windows. Enables IPv6 support on macOS. Minor fixes and updates.
-
Network Audio Daemon 3.5.4 released.
Small fixes and performance improvements. Images have also been updated with new drivers.
-
Network Audio Daemon packages.
Network Audio Daemon packages now also available for 64-bit ARM architecture.
-
Network Audio Daemon 3.5.1 released.
Disconnects HQPlayer on DAC/driver start failure in order to trigger full session restart. Plus some small fixes/improvements.
-
Network Audio Daemon 3.5.0 released.
Now supports also WASAPI on Windows, plus minor improvements and fixes on all platforms.
-
Network Audio Daemon 3.0.0 released!
Supported OS platforms for NAA now include Windows (64-bit ASIO) and Mac OS X (CoreAudio). This version also supports native non-DoP DSD output on Linux and Windows (requires HQPlayer 3.6.0 or newer).
-
Network Audio Daemon 2.0.2 released.
Fixes a start-up problem. Also includes some minor adjustments.
-
Network Audio Daemon 2.0.0 released!
New improved protocol with special optimizations for streaming DSD content.
-
Network Audio Daemon for ARM
Network Audio Daemon now available for three ARM-based hardware platforms, the BeagleBoard/BeagleBone, Raspberry Pi and Acme Systems FOX G20.
-
A summer 2012 release of HQPlayer Desktop 2.8.1 and Network Audio Daemon 1.2.1!
Unicode fix and various other smaller fixes in HQPlayer. Small but important core component improvement in both HQPlayer and Network Audio Daemon.
-
HQPlayer Desktop 2.8.0beta6 and Network Audio Daemon 1.2.0
Support for up to 24.576 MHz SDM and 1.536 MHz PCM. Multi-room support with Network Audio Adapters. One second pre-playback mute to give slow update rate PLLs time to properly acquire lock. Optimizations to reduce CPU load, memory use and to improve cache performance. Also reduced initialization times. Lot of fixes, reworks and improvements, software…
-
Network Audio Daemon 1.1.4 for a Network Audio Adapter.
Some new startup options and init script fixes. Also contains a fix related to freeing up the audio device when client disconnects in order to better support other processes accessing audio devices. Now also runs a script when client is connected or disconnected.
-
HQPlayer Desktop 2.7.5.1 and Signalyst Network Audio Daemon 1.1.1 released.
Small fixes and Network Audio Adapter discovery address change in HQPlayer Desktop.Network Audio Daemon now releases audio devices when idling, also includes the discovery address change.
-
HQPlayer Desktop 2.7.5 and Signalyst Network Audio Daemon 1.0.0 released!
Support for Signalyst Asynchronous Network Audio Adapters; for maximum isolation all processing is performed in the player application and processed data is asynchronously streamed over network to a very lightweight network audio adapter interfacing to the DAC. Now none/none setting is more explicitly bit-perfect. Also small GUI improvements, such as movable splitter between transport and…