Tag: Version 2
-
Network Audio Daemon 2.0.0 released!
New improved protocol with special optimizations for streaming DSD content.
-
HQPlayer Desktop 2.10.0 released
Redesigned DSD7 modulator plus number of fixes and improvements in various different areas.
-
HQPlayer Desktop Experimental ARM release
First experimental release of full HQPlayer Desktop for ARM platform is now available for the SolidRun CuBox.
-
HQPlayer Desktop 2.9.1 released
Fixes a 2.9.0’s regression in the half-band down-sampling algorithm and in the convolution engine.
-
HQPlayer Desktop 2.9.0 released!
Significant performance and small quality improvement in the poly-sinc down-sampling algorithm. Now the poly-* DSD-to-PCM converters can run on almost any machine and are now the most recommended way when conversion is needed. Two new delta-sigma modulator variants. The “dual-wire” DoP 1.1 DSD128 (0x06/0xF9) is now supported with both WASAPI on Windows and ALSA on…
-
HQPlayer Desktop 2.8.4.3 for Windows
HQPlayer Desktop 2.8.4.3 for Windows available to fix a playback start problem on Windows 8 WASAPI with some device drivers.
-
HQPlayer Desktop 2.8.4 released
Optional high frequency expansion algorithm for the convolution engine. New resampling / oversampling algorithm “poly-sinc-hb”. Improved parallelization for multi-core processors. Initial support for Windows 8. Many small usability improvements.
-
HQPlayer Desktop for Linux updated to version 2.8.2.3
Fix for a possible crash and rework of ALSA back-end to support wider range of audio hardware.
-
HQPlayer Desktop 2.8.2.2 released!
Improved volume control for DSD content. Fixed a playlist loading issue with certain M3U8 format playlists. Option to ignore all warnings about certain complex conversion ratios.
-
HQPlayer Desktop 2.8.2 released!
Rewritten minringFIR filter, now available also as oversampling filter in the delta-sigma modulator. Support for convolution engine in PCM-to-SDM conversion case. Button to invert absolute phase. Number of other fixes and improvements.
-
A summer 2012 release of HQPlayer Desktop 2.8.1 and Network Audio Daemon 1.2.1!
Unicode fix and various other smaller fixes in HQPlayer. Small but important core component improvement in both HQPlayer and Network Audio Daemon.
-
HQPlayer Desktop 2.8.0 released!
Experimental support for “dual wire” mode on Linux to reach 384 kHz PCM and 128x SDM rates over dual AES links or channel-per-I2S with standard rates on other interface types. Also includes various fixes. For other changes, see earlier beta announcements.
-
HQPlayer Desktop 2.8.0beta6 and Network Audio Daemon 1.2.0
Support for up to 24.576 MHz SDM and 1.536 MHz PCM. Multi-room support with Network Audio Adapters. One second pre-playback mute to give slow update rate PLLs time to properly acquire lock. Optimizations to reduce CPU load, memory use and to improve cache performance. Also reduced initialization times. Lot of fixes, reworks and improvements, software…
-
HQPlayer Desktop 2.8.0beta5
Support for ID3v2 tags in AIFF and DSF files. Also improved overload handling for the delta-sigma modulator.
-
HQPlayer Desktop 2.8.0beta4
Multichannel speaker level and distance processing for SDM/DSD output. Number of optimizations and small UI logic improvements. Updated manual to match new functionality. Support for a new DSD-in-PCM packing scheme (with 0x05/0xfa markers).
-
HQPlayer Desktop 2.8.0beta2
Non-decimating (performed at original rate) digital volume control for DSDIFF/DSF file playback to DSD-DACs, option for downconversion from 128fs DSDIFF/DSF files to 64fs DSD-DACs. General improvements in delta-sigma modulator. New “Direct SDM” configuration option to pass DSDIFF/DSF content to DSD-DACs without processing. Also CD playback has been fixed.
-
HQPlayer Desktop 2.8.0beta1
Now includes delta-sigma modulator to feed DSD-capable DACs with more native 1-bit SDM streams. High quality single-pass upsampling from PCM to SDM. Manual selection between PCM and SDM modes included in the main window.
-
HQPlayer Desktop 2.7.5.1 and Signalyst Network Audio Daemon 1.1.1 released
Small fixes and Network Audio Adapter discovery address change in HQPlayer Desktop.Network Audio Daemon now releases audio devices when idling, also includes the discovery address change.
-
HQPlayer Desktop 2.7.5 and Signalyst Network Audio Daemon 1.0.0 released!
Support for Signalyst Asynchronous Network Audio Adapters; for maximum isolation all processing is performed in the player application and processed data is asynchronously streamed over network to a very lightweight network audio adapter interfacing to the DAC. Now none/none setting is more explicitly bit-perfect. Also small GUI improvements, such as movable splitter between transport and…
-
HQPlayer Desktop 2.7.4 released!
Special handling for DSDIFF/DSF files in playlist mode to avoid clicks/pops between unrelated tracks. Remembers last used directory of all file dialogs. Small fix for DSF file handling. A lot of small changes.
-
HQPlayer Desktop for Linux updated to 2.7.3.1
HQPlayer Desktop for Linux updated to 2.7.3.1 to solve some issues and add support for Fedora (16) distribution.
-
HQPlayer Desktop 2.7.0 released!
This release includes a new trial period. Numerous changes, including redesigned UI, support for playlists (pls/m3u or adding files/trees to an internal playlist), support for mixed rate transports, support for native/direct playback of DSDIFF/DSF files using different “PCM packing” schemes (Linux&WASAPI), fixed issue on native DSF playback. Significant rework of one-bit audio to PCM conversion…
-
HQPlayer Desktop 2.6.0 released
New product split into Desktop, Embedded and Engine SDK versions. Completely reworked volume control and soft limiter. DAC bits setting for those with non-24-bit DAC behind unidirectional connection like S/PDIF or AES/EBU. Experimental “non-ringing” polynomial interpolation. And some bug fixes from the beta.
-
HQPlayer and HQPlayer Engine SDK version 2.6.0 beta1 released
Includes preliminary support for direct/native playback from DSDIFF and DSF files to ASIO devices with DSD support. Includes also other minor changes and improvements.
-
HQPlayer 2.5.5 released
Now includes 64-bit Desktop version, improved installer, dropped network licensing support. Due to changes in directory structure and shortcut naming, uninstall older version before installing this to avoid broken shortcuts and abandoned files!
-
HQPlayer Engine SDK 2.5.5 released!
Supported platforms are Windows Vista/7 and Linux. Includes headless engine daemon and control interface.
-
Note!
If you have audio problems when using USB audio device with default settings, try increasing buffer time to 100 ms. This will most likely help.
-
HQPlayer 2.5.4.4 minor fixes release
Small GUI improvements and further noise shaper tunings for NS4 and NS9.
-
HQPlayer 2.5.4.1 minor fixes release
Better handling for paths without supported files, installer and manual updates.
-
HQPlayer 2.5.4 released!
Fixes crashes with certain slightly buggy ASIO drivers. Also fixes incorrect total remain value in some cases as well as contains some further tunings in NS1 noise shaper.
-
HQPlayer 2.5.3.1 quick-fix version released
Fixed a newly introduced first-time installation startup problem the in desktop version. If you are experiencing this problem, either download this new version, or first start embedded version, go to Settings, click OK and then start the desktop version… No need to update if you have 2.5.3 desktop version already working.
-
HQPlayer 2.5.3 released!
Improvements for RIFF (WAV) files with more than 24-bit resolution, fix sample bit indication and other minor changes. Fixed a default settings problem introduced in previous version. Better handling for “basic” mode and improvements in a way mode switching is done.
-
HQPlayer 2.5.2 released!
Fixed problems in non-mapped network share handling and minor problems in RIFF (WAV) handling. Improved ASIO support. Improved performance in FIR resampler and DSDIFF/DSF file playback. Re-tuned noise shapers and dithers. Improvements in installer. Also contains “basic” and “advanced” modes for the main screen.
-
HQPlayer 2.5.1 released!
Included ASIO support in Desktop version, further tuning in poly-sinc* resamplers, completely reworked FFT-resampler and other minor improvements and fixes. Network licenses available on request for existing customers. Configuration file can be specified as a commandline parameter.
-
HQPlayer 2.5.0 released!
Fixed a startup issue on some Windows 7 systems, support for metadata parsing from file path, changes in the desktop GUI, support for multiselect in transport/paths list, support for DSF file format, improved sound quality for DSDIFF/DSF file playback, fixes in RIFF (WAV) handling, preliminary support for (non-compressed) multichannel DSDIFF/DSF files, plus set of minor…
-
HQPlayer Desktop for Linux is ready
Available on special request and for system integrators. If you would like to see a generic release, please vote by sending an email!
-
HQPlayer 2.4.1 released!
Minor update, more optimizations to the desktop version to make it consume less CPU power. Now the desktop version can play DSDIFF-files on equally slow CPU as the embedded one.
-
HQPlayer 2.4.0 released!
This is a major update, includes release version of the desktop and embedded versions! Various fixes and new features, most notably support for WAV (RIFF) playback, support for any sampling rate for convolver impulse responses, new desktop UI with high quality digital volume control, selectable convolution engines, configurable gain compensation for the convolution engine, etc,…